Transformer Oil Tank Leakage Test Bench
1.Summary
Transformer Oil Tank Leakage Test Bench is special equipment for testing corrugated fin oil tank which is welded ,its principle is that the nozzle inside the tank make the diesel Creates an atomizing ,adhere uniformly on the inside surface of tank, under the blow of the compressed air ,make the diesel speed up the infiltration, Judge tank leakage situation.
According to whether there is diesel osmosis imprinting on the outside of tank.
2.Main parameters
| model |
JLJ-1200/740 |
JLJ-1680/980 |
| Work table size (LxW) mm |
1200 x 740 |
1680 x 980 |
| Oil pump power (kw) |
1.1 |
1.5 |
| Air pressure (mpa) |
0.1 |
0.1 |
3.The drawings reference
4.The composition of the machine
Main frame, Pneumatic parts, Clamps, Motors
5. Operation sequence
5.1 Preparation working: equipment supply air, start the diesel pump
5.2 Adjust the clamping cylinder position (manual)
5.3 Tank shell upside down on the desk of leak test machine (manual/crane)
5.4 Move the clamping cylinder position (manual)
5.5 Cylinder clamping tank edge (button)
5.6 Jet fuel (button)
5.7 Injection stop after a few seconds (automatic)
5.8 Compressed air to blow (automatic)
5.9 Check the leakage point and tag (Visual or lighting)
5.10 Stop blowing/exhaust (automatic)
5.11 Loosen the clamping cylinder (button)
5.12 Move the clamping cylinder (manual)
5.13.
Remove the tank shell, change the other one (manual/crane)
Audited Supplier 
Transformer Oil Tank Leakage Test Bench
){kind=link}