High Effiency Aluminum Rod Continuous Extrusion Production Line

• Wheel Diameter: 550mm
• Main Motor: 400kw/1000rpm
• Rotation Speed: 1-8 Rpm
• Rod Diameter: 22 mm 0.2 mm
• Tensile Strength: <170n/ mm2
• Maximum Cross Sectional Area: 400mm2~6000mm2
• Model NO.: LJ550
• Maximum Width: 280 mm (or 90mm Rod)
• Output:(Average): 2300kg/H
• Spooler Flange: 2000~2500mm
• Power Supply: AC 380 V, 3 Phase, 50 Hz,
• Transport Package: Standard Packing
• Specification: 45m X 10m
• Trademark: Senerge
• Origin: Zhejiang
• Production Capacity: 30 Sets/Month

Product Description

TJ550A Continuous Extrusion Machinery
Specifications
a. Specification of TJ550A Machinery:
Wheel Diameter:                      550mm
Main Motor:                              400KW/1000rpm              
Rotation Speed:                        1-8 rpm
b. Feedstock
Material: Clean of up casting copper rod
Rod Diameter:                           22 mm± 0.2 mm
Tensile strength                         <170N/ mm2
c. Product
Maximum Cross Sectional Area:   400mm2~6000mm2               
Maximum Width:                           280 mm (or 90mm rod)
Output:(average)                           2300Kg/h
Flash level: (depending on section area and normal tooling)       3-6%
Spooler Flange:                             2000~2500mm                  
d. Plant Requirement
Power Supply:                          AC 380 V, 3 Phase, 50 Hz, 550KVA
Compression Air:                      0.7MPa, 2m3/min
Loop Cooling Water:                 >0.3MPa, 100m3/h
Space:                                     45m X 10m

The structure of the machine is the grooved wheel and shaft assembly. The main shaft is driven by an infinitely variable, thyristor-controlled DC electric motor, via an epicyclical gearbox. The power output envelope from the drive is matched to the production rates specified by operator. There are mount roller bearings that incorporate multiple seals to retain oil and prevent the ingress of foreign material.
The Coining roll assembly to coin the feed rod firmly in the wheel groove.
The shoe contains the die-chamber assembly can be opened and closed easily by hydraulic cylinder, high pressure cylinder used to support the shoe in working position. With supplement tooling, the extrusion wheel of the machine can be replaced easily. Exchange chamber and die is also very fast.