Double Layer Vertical Taping Machine

• After-sales Service: Onsite Commission and Training
• Function: High Temperature Resistance
• Demoulding: Automatic
• Condition: New
• Warranty: 12 Months
• Automatic Grade: Automatic
• Model NO.: TR-630
• Installation: Vertical
• Driven Type: Electric
• Mould Life: 300,000-1,000,000 Shots
• Material: Wire and Cable
• Wire Size: Conductor 0.3-3mm/Wires 1.5-8mm
• Control: PLC
• Applicable Spool: Dia 500-630mm
• Applicable Head Shaft Hole: Dia56mm, 80mm, 125mm
• Transport Package: Full Container
• Specification: Diameter 630mm
• Trademark: TRIHOPE
• Origin: Shanghai, China
• Production Capacity: 10 Sets / Month

Product Description

The Double Layer Vertical Taping Machine Suitable for copper wire and cable wrap polyester tape, mica tape, transparent tape, PTFE film, aluminum foil paper, etc

The Double Layer Vertical Taping Machine is composed of Pay-off Device, Power transimmission Device , taping device , take-out device and electric device.

 

Pay-off device is  Ф500mm-Ф630mm single head non-shaft pay-off stand

1.applicable spool:Ф500mm-Ф630mm;applicable head shaft holeФ56mm,Ф80mm,Ф125mm

2.spool loading unloading way:Electric lifting and hand clamping

3.tension control:2.5kg Magnetic powder tension and braking, automatic shutdown and automatic braking.

 

Power transimmission device

1.Traction deceleration motor: 1.5KW(380V 50HZ), 2HP inverter (sine) speed regulation

2.1 st taping motors: 2.2KW motor (Shanghai Motor) Servo controller (sine) control tension

3.2 nd taping motor: 2.2KW motor (Shanghai Motor) Servo controller (sine) control tension

4. Traction wheel ; material ZL-101, Wheel diameter Ф400mm.

 

Taping Device

1.taping size: inner hole:Ф76mm  spool diameter:Ф280mm  height:80mm-110mm

2.taping tension:750w servo control

3, max taping speed : 2500 rpm*tape width*overlap rate (no loading), regular taping speed 2300rpm(according to atpe tension bearing loading );

4.overlap rate:adjust the traction speed to control;

5.selection of tape width:Approximately equal to the circumference of the covered wire

6. appicable wire diameter(mm):conductor Ф0.3mm-Ф3mm,wiresФ1.5mm-Ф8mm;

7.taping direction:left right adjustable.

 

Take-up Device

1. take-up spool size:Ф500mm-Ф630mm; shaft hole:applicable head shat hole Ф56mm,Ф80mm,Ф125mm

2. row spacing:light bar row wire;

3. Take-up tension: 5N.M(380V 50HZ), 1:20 deceleration torque motor take-up, take-up tension potentiometer adjustment, take-up tension is always constant from empty to full spool