Well Type Vacuum Annealing Furnace for Al and Cu Busbar

• After-sales Service: on Site Debugging and Training
• Warranty: 2 Years
• Furnace Can Effectively Size: 1100 * 2000 mm (180 Kw)
• Size of Reel: 800 * 600 mm
• Rated Power: 180kw/Furnace
• Rated Voltage and Frequency: 380V/60Hz
• Model NO.: customized
• Use Temperature: 600
• Maximum Rated Temperature: 650
• Thermocouple: 4 PCS
• Normal Service Temperature: 1050
• Highest Temperature: up to 1250
• Transport Package: Standard Packing
• Specification: 1100*2000mm
• Trademark: Trihope
• Origin: Shanghai
• Production Capacity: 30 Sets / Month

Product Description

 

Short Description:

The annealing furnace is designed and developed by our company for non-oxidizing bright annealing of non-ferrous metals (such as copper wire, copper pipe, copper belt, etc.) and ferrous metals (such as electrode wire, copper clad steel wire, stainless steel wire, etc.).
 

Product details:

Our standard configuration for vacuum annealing furnace consists of a mother furnace and 2 sub - furnaces.Mother furnac is the heating furnace and the sub-furnace is the cooling furnace.Subfurnace can be increased according to your output.Since the heating time and holding time are relatively short, and the cooling time is longer,water cooling can be adopted.In order to save energy consumption, we are generally equipped with more than two sub-furnace, alternate cycle use.As the oven cools ,you can use the residual heat of the furnace to heat the next furnace.If you use a mother furnace and a sub - furnace, it's the same as if you're heating it a second time and you're cooling it down, and you're heating it up for a long time.

Technical Parameters of AL and CU wireacuum annealing furnace:
The annealing furnace can effectively size:1100 * 2000 mm (180 kw) Ф
Size: Ф 800 * 600 mm
Effective size of floor space: see the drawing
Rated power: 180KW/furnace
Rated voltage and frequency: 380V/60HZ
Use temperature :600ºC
Maximum rated temperature: 650ºC


Subfurnace tank of AL wire vacuum annealing furnace
using the δ=10 mmsus304 (production taigang tolerance of 9.5 or above) stainless steel tanks, the use of special mould pressing forming 150 mm corrugated shape, good tensile strength, not changeful form, for at the bottom of the pot type, on both sides of furnace tank is equipped with lifting climbing, furnace cover, the flange is made of the δ= 30 mm steel plate processing molding, furnace cover, flange, the up and bottom is equipped with water cooling system.

The mother furnace body of the reheating furnace for CU wire vacuum annealing furnace is composed of S=5mmQ235 steel plate rolled into a row steel reinforced structure, refractory brazing furnace plate, crystal cotton brick, silicate aluminum cotton, heating system, lifting and positioning mechanism.