| Customization: | Available |
|---|---|
| Board Width: | 20 ~ 60, Any Adjustable |
| Board Length: | 45 ~ 150 mm |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Brief Introduction of Winding Spacer Feeding and Milling Machine
The raw material for processing is the strip with good thickness, width and peripheral fillet, and the material is insulating paperboard or laminated insulating paperboard. It can be clamped at one time to complete the processing of single dovetail groove and fillet on both sides.
Structure description :
1. Worktable
The worktable is made of nonmetal material and has enough strength and rigidity. When the material is transported, processed and fixed, the upper and side pressing devices shall be equipped on the workbench, and the contact surface shall be non-metallic material.
2. Clamping device
The contact surface of clamping device is non-metallic material. The clamping device is pneumatic. After the material is clamped, the material is fed to the cutting side according to the set processing length
Required Raw material size:
Board width 20 ~ 60, any adjustable
Board length: 45 ~ 150 mm
Total system power: 7.7KW.
Air source pressure: 0.5Mpa
Feed rate: manual setting
Thickness of one time clamping board: 340mm. Thickness of cushion block - 1.0 ~ 8.0 mm
After processing, the length deviation of the same specification cushion block is less than 0.3mm.
After processing, the processing surface of cushion block shall be smooth and flat, and the surface shall not be carbonized and polluted.
){kind=link}