I . Equipment Summary We now introduce an annual output of 1,000,000 KVA dry-type pressure-casting epoxy vacuum casting equipment, based on the company accumulated over the years experience in vacuum casting equipment design and design specifications, combined with the design concepts of international peers. According to user requirements, we now determine the following technical solutions for further negotiations between the two sides.
II. Main Components Parts 1.1,a set of 300L final mixing tank
1.2,a set of vacuum pressure casting tank
1.3,two sets of heating system
1.4,two sets of vacuum system
1.5,a set of control system
1.6,a set of cooling water system
1.7,a set of pneumatic and pressurized system
1.8,a set of casting valve pipe
1.9,a set of steel platform 2,Total technical indicators and parameters 2.2,Size of casting pot: Φ2400×3000mm
2.2,Main pumping speed of vacuum system 300L/S
2.3,Working temperature of casting spot 70~85ºC(adjustable)
2.4,Cold limit vacuum degree of casting spot ≤50Pa
2.5,Final working vacuum degree of casting spot ≤100Pa
2.6,Leakage rate of casting spot ≤200Pa. L/S
2.8,Take a dynamic mixer for mixing materials
2.9,The mixing tank adopts electric heating, thermal oil as the heat transfer medium, automatic temperature control.
Casting pot adopts electric heating element heating directly, rock wool insulation, stainless steel plate armor, outside surface temperature are not higher than the room temperature 20 ºC.
3,Technical specifications of each system: 3.1,Final mixing tank:
Effective volume: 300L
Heat conducting oil jacketed heating: 10KW
Limit vacuum degree: ≤50Pa
No-load leakage rate: ≤100Pa. L/S
Working temperature: 70-85ºC(adjustable)
Stainless steel anchor agitator: one pc
Internal film degassing device one set
Manual vacuum suction valve(DN25) one set
Mixing motor: one pc
Outside surface temperature of tank: ambient temperature+20ºC
Water cooling system: one set
Lighting observation device: one set
Temperature measuring transducer: two pcs
Lid seal structure: one set
Rock wool insulation, dealing with painting veneer armor.
Inlet and outlet of pipe flange of stainless steel tank should also be used stainless steel.
This tank is used for mixing epoxy resin and curing agent mixer.
The speed reducer is used to stir in the tank.
The discharge valve is DN50 stainless steel pneumatic valve.
Audited Supplier 
){kind=link}