Escl-2.52X1500 Slitting and Cut to Length Line

• Thickness of Strip: 0.3~2.5mm
• Width of Strip: 400 ~1500mm
• Coil Weight: Max. 8, 000kg
• Coil Inside Diameter: 508/610mm
• Coil Outside Diameter: 800~1, 500mm
• Length of Cut Sheets: 500-4, 500 mm
• Model NO.: ESCL-2.52x1500
• Weight of Stacker: Max.4, 000kg
• Line Speed: Max. 20m/Min
• Cuting Speed: 7-8PCS/2000mml/Min
• Pass Line Height: 1, 000mm Above Floor Level
• Transport Package: Standard Packing
• Specification: Slitting and Cut to Length Line
• Trademark: Trihope
• Origin: Shanghai
• Production Capacity: 30 Sets/Month

Product Description

ESCL-2.52x1500 Slitting and Cut to Length Line 

1.  GENERAL SPECIFICATION    

1. INPUT MATERIAL 

Material	Cold rolled steel coil, Galvanized steel coil
Thickness of strip	0.3~2.5mm
Width of strip	400 ~1500mm
Coil weight	Max. 8,000kg
Coil inside diameter	508/610mm
Coil outside diameter	800~1,500mm

 

1. PRODUCTS   

Slitting strips	3
Length of cut sheets	500 - 4,500 mm
Slitting width accuracy	+/-0.3mm
Length accuracy	+/ - 1.0mm/2m
Diagonal accuracy	+/ - 1.5mm/ 1250mm W x 2,000mm L
Weight of stacker	Max.4,000kg

 

1. SPEEDS 

Line speed	Max. 20m/min
Cuting speed	7-8pcs/2000mmL/min

 

1. OTHERS

Pass line height	1,000mm above floor level
Line direction	From "Right" to "Left" from the view of operator side
Painting color	as required
Required Utilities	Power supply     3ph AC380V 50Hz w/ PE  Capacity         60 kw
	Compressed air   pressure 0.5~0.7Mpa Capacity         1.0M^3/min

    
 

1. DETAILED SPECIFICATION

 

1. COIL SKID                    

Type	V- type
No. of coils stock	One coil for Coil OD 900-1500mm
Coil receiving plates	Nylon plates
Main body	Welded by steel plate

Note : Coils of diameter less than 900mm should be stocked directly on the coil car

 

1. COIL CAR  

Type	Pit type
V-platform	Mounted with nylon skid pads
Up/down	by hydraulic cylinder, φ125X650st
I n/out	by AC 1.1kw geared motor
Main body	Welded by steel plate

                      

1. UNCOILER WITH SNUBBER ROLL  

Type	Cantilever with four segments type
Unwinding direction	Up-ward
Drum	Collapse and expanded Dia. from 470 to 520mm by hydraulic cylinder with rotary joint
	Rubber sleeve Dia: 610mm
	Segment material :45# , hard chrome-faced
	Sliding sleeve material :QT500
Main shaft	42CrMo forged steel
Gears	40Cr,heat treated
Drum drive	By AC1.5kw geared motor with pneuamatic clutck
Back tension and brake	By pneuamatic disk brake
Snubber roll	PU Coated with strapping groove at center
	Up/dwon by hydraulic cylinder
	Driven by AC 0.55kw geared motor
	Up/dwon by hydraulic cylinder
Main body	Welded by steel plate

                                           
 

1.  LEVELER     

Type	2-Hi, 7 rolls type
Pinch roll	150mmØ x 1650mmL x 2 pcs.
	Urethane rubber lined surface
	Upper roll up/down by hydraulic cylinder
Work roll	Top 3 and bottom 4
	105mmØ x 1650mmL x 7 pcs.
	42CrMo, heat treated and ground ,handness HRC58, CR coating
Levell gap adjustment	By AC 0.55kw x 2 geared motor
	Open -5+40mmH , display thu digital indicator
Driving unit	Drive motor - AC15kw
	Gear box
	Universal joint shaft
Main body	Welded by steel plate