| Customization: | Available |
|---|---|
| Condition: | New |
| Certification: | ISO, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Electrical Power Transformer Tank Fin Forming Machine
1.General Description
1) Special machine for transformer fuel tank.
2) Include loading trolley, main machine, hydraulic station and electric control box etc.
3) Has reasonable structure and operation easily.
4) The hydraulic system is automatic controlled and running stable.
5) May complete such as forming, shearing, bending etc process within one time when you put all operation parameters at screen.
6) The main technical parameter
2.Main technical parameter
| 1.Machining range | |
| Material width B | 300-1300mm |
| material thickness S | 0.5-1.5mm |
| corrugation height H | 50-400mm |
| corrugation pitches t | ≥45mm |
| net clearance between corrugation e | 6mm |
| number of corrugation panel sets n | 1-4 sets |
| corrugation panel length L | ≤2000mm |
| bend height c 25mm(or as per customer requirements) | 25mm(or as per customer requirements) |
| corrugation panel fore-end a | ≥25mm |
| corrugation panel rear-end b | ≥25mm |
| feeder speed 0-28m/min | 0-28m/min |
| molding speed | 30-25s/wave |
| shear burr | ≤0.3mm |
| system rate pressure | 10MPa |
| system maximum pressure | 12MPa |
| electric power AC 3 phase 4 wires | 380V/50HZ(or as per customer requirements) |
| total electric power | 18KW |
| machine demension | 2200mmX3000mmX11000m |
| 2. Loading trolly | |
| loading weight | max 5000 kg(normalconfiguration,can be meet as customer requirements) |
| go up and down stroke | max 350mm |
| table width | 540x1300 mm |
| go up and down speed | 50mm/min |
| 3..Decoiler | |
| Loading weight | max 5000 kg((normalconfiguration, as customer requirements) |
| Inner diameter | 500 mm |
| Outer diameter | 1000 mm |
| Width | 300-1300 mm(the outer diameter should be less than 930mm when width of roll material is bigger than 1000mm ) |
| Decoiling speed | 0-28m/min |
| Decoiler barrel diameter | 450-520 mm |
| 4. Feeder system | |
| Servo motor | 2 kw |
| Encode | 1000 lines |
| Feeder speed | 0-28m/min |
| Feeder roller diameter | 114 mm |
| Feeder roller width | 1400 mm |
| Measure roller diameter | 100 mm |
| 5. Front mould assy | |
| Demension | 1300x410x36 mm |
| Front and rear mould distance | ≤850 mm |
| Front mould uplift height | 20 mm |
| 6. Rear mould assy | |
| Rear mould board dimension | 1470x500x36 mm |
| Rear mould board uplift height | 410 mm |
| 7.Shearing and bending assy | |
| Scissors length | 1400 mm |
| Shear stroke | 420 mm |
| 8.Work table | |
| Dimension | 1400x2000mm |
){kind=link}