| Customization: | Available |
|---|---|
| Condition: | New |
| Voltage: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Combined type copper wire hydraulic drawing machine from china
1. Machine's summarize
LHT450/13 water tank drawing machine with annealing machine which is take-up advantage parts of technical including domestic and abroad, which use same diameter drum, straight pull type wire drawing machine. Also including lubrication cooling system. When this machine with continuous devices, the speed of drawing annealed copper is 15m/s. Also it makes the annealing wheel (up and down's traction wheel) and drawing machine's output drum with the same speed.
2.Main parameters
A.Wire's input diameter: copper 8mm, aluminum 9.5mm (wires do not need to be annealed).
B.Wire's output diameter: copper 3.5-1.2mm; Aluminum 4.0-1.7mm.
C.Speed of the wire output: 15m/s or so. Copper: 22m/s or so.
D.Speed of replace coil: 8-12m/s, with certain length while set.
E.Max drawing times: 13.
F.Wire's output wheel diameter: 450mm.
G.Lengthening coefficient of dies: 1.304-1.25.
H.Winding coil's size: PND500, PND60, PND30.
I.Max potency of emulsion: 1000L/min, pressure 0.2-0.3Mpa.
J.Use level of compressed air: 10M³/h, air pressure 0.6Mpa.
K.Main motor power:132KW.
L.Motor power of replace die: 18.5kw.
M.Motor power of winding wire: 15kw*2.
N.Motor power of total unit: 456.5KW.
O.Total weight: 20000 kg or so.
){kind=link}